{"id":90304,"date":"2026-08-09T19:00:23","date_gmt":"2026-08-09T18:00:23","guid":{"rendered":"https:\/\/www.plusheat.co.uk\/?p=34871"},"modified":"2026-08-09T19:00:23","modified_gmt":"2026-08-09T18:00:23","slug":"boiler-controls-not-working","status":"publish","type":"post","link":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/","title":{"rendered":"Boiler Controls Not Working: Causes & Solutions"},"content":{"rendered":"

If your boiler controls not working has left you fiddling with the thermostat for no result, the causes are usually more ordinary than people expect.\u00a0<\/span><\/p>\n

Most of the time it comes down to flat batteries in a wireless thermostat, a lost connection between the thermostat and the boiler’s receiver, a programmer or timer that’s been knocked out of sync, a faulty wiring connection, or a stuck valve that’s stopping the system responding the way it should.\u00a0<\/span><\/p>\n

Occasionally the issue sits deeper in the boiler’s circuit board, which is where a Gas Safe registered engineer needs to step in rather than a DIY fix. The good news is that most of these problems have a clear cause and a fairly simple solution once you know what to look for.<\/span><\/p>\n

What Causes Boiler Controls To Not Work?<\/b><\/h2>\n

Boiler controls stop working for a handful of recurring reasons, ranging from something as small as a dead battery to something as involved as a fault on the main circuit board. The most common culprits are power and battery issues, a broken or ageing thermostat, lost wireless pairing between the thermostat and receiver, wiring faults, a stuck or failed valve, and problems with the programmer or timer settings.\u00a0<\/span><\/p>\n

Each of these has its own warning signs and its own fix, which we’ll go through one by one below.<\/span><\/p>\n

Flat Or Faulty Batteries<\/b><\/h3>\n

Flat or faulty batteries are one of the most frequent reasons a wireless thermostat stops talking to the boiler, and it’s often the very first thing worth checking before assuming anything more serious is wrong.\u00a0<\/span><\/p>\n

Wireless thermostats rely on batteries to power the display and send signals to the receiver near the boiler, and when those batteries start running low, the display can go dim, flicker, or stop responding altogether, even though the boiler itself is perfectly fine.<\/span><\/p>\n

This is easy to miss because a partially working display can trick you into thinking the fault is with the boiler rather than the thermostat. If you press buttons and nothing changes, or the screen looks fainter than usual, weak batteries should be top of your checklist.<\/span><\/p>\n

How To Fix<\/b><\/p>\n

    \n
  1. Locate the battery compartment on the back or underside of your thermostat.<\/span><\/li>\n
  2. Remove the old batteries and check for any corrosion or leakage around the terminals.<\/span><\/li>\n
  3. Insert fresh batteries, matching the correct polarity as shown inside the compartment.<\/span><\/li>\n
  4. Wait a minute or two for the display to reboot and reconnect with the boiler.<\/span><\/li>\n
  5. Test by adjusting the set temperature and checking whether the boiler responds within a few minutes.<\/span><\/li>\n<\/ol>\n

    A Lost Wireless Connection<\/b><\/h3>\n

    A lost wireless connection between the thermostat and its receiver is another very common cause of boiler controls not working, particularly with smart thermostats or systems that rely on a separate receiver box near the boiler. If the pairing between the two devices drops, the thermostat can look perfectly normal on screen but simply fail to get the message through to the boiler.<\/span><\/p>\n

    This tends to happen after a power cut, a router reset if you’re using a smart thermostat like Hive or Nest, or sometimes just from age and general wear on the signal. You’ll usually notice the boiler isn’t firing up even though the thermostat is clearly set above room temperature.<\/span><\/p>\n

    How To Fix<\/b><\/p>\n

      \n
    1. Check that the receiver unit near the boiler has power and its indicator light is on.<\/span><\/li>\n
    2. Move the thermostat closer to the receiver temporarily to rule out a range issue.<\/span><\/li>\n
    3. Follow the manufacturer’s re-pairing instructions, usually a button press on both the thermostat and receiver.<\/span><\/li>\n
    4. Restart your home router if you’re using a smart thermostat connected via Wi-Fi.<\/span><\/li>\n
    5. Confirm the connection by adjusting the temperature and watching for the boiler to respond within a few minutes.<\/span><\/li>\n<\/ol>\n

      A Faulty Or Ageing Thermostat<\/b><\/h3>\n

      A faulty or ageing thermostat is a common cause once batteries and wireless connections have been ruled out, especially in homes where the thermostat has been in place for several years. Over time, the internal sensor that reads room temperature can lose accuracy, which leads to inconsistent heating, rooms that never quite reach the set temperature, or a boiler that cycles on and off far more often than it should.<\/span><\/p>\n

      You might also notice the thermostat display shows a temperature reading that clearly doesn’t match how the room actually feels, which is a strong sign the sensor itself has drifted or failed. This kind of fault tends to develop gradually rather than appearing overnight, so it’s easy to put up with it for longer than you should.<\/span><\/p>\n

      How To Fix<\/b><\/p>\n

        \n
      1. Compare the thermostat’s displayed temperature against a separate room thermometer to check accuracy.<\/span><\/li>\n
      2. Clean any dust from around the thermostat’s sensor vents using a soft, dry cloth.<\/span><\/li>\n
      3. Try a full reset following the manufacturer’s instructions, usually done through the settings menu or a reset button.<\/span><\/li>\n
      4. If accuracy issues continue after a reset, contact a Gas Safe registered engineer to assess whether the unit needs replacing.<\/span><\/li>\n
      5. Ask about compatible replacement models if the current thermostat is more than eight to ten years old.<\/span><\/li>\n<\/ol>\n

        Wiring Faults Or Loose Connections<\/b><\/h3>\n

        Wiring faults or loose connections can stop boiler controls working properly, particularly in wired thermostat and programmer setups rather than wireless ones. Over time, connections behind the wall plate can loosen through vibration, general wear, or even from a previous DIY job that wasn’t quite finished off properly, and this interrupts the signal between the control and the boiler.<\/span><\/p>\n

        Signs of a wiring issue often include a thermostat that works intermittently, cuts out at random, or stops responding altogether despite showing power on the display. Because this involves opening up electrical connections near a gas appliance, it’s not the kind of fault to investigate without the right training.<\/span><\/p>\n

        How To Fix<\/b><\/p>\n

          \n
        1. Note down exactly when the fault occurs, such as after moving furniture near the wall unit or during specific weather conditions.<\/span><\/li>\n
        2. Avoid removing the thermostat cover yourself if you’re not confident working with household wiring.<\/span><\/li>\n
        3. Book a Gas Safe registered engineer to inspect the wiring behind the control unit and the connections at the boiler.<\/span><\/li>\n
        4. Ask the engineer to secure or replace any damaged wiring found during the inspection.<\/span><\/li>\n
        5. Request a full test of the controls once the repair is complete to confirm the fault has been resolved.<\/span><\/li>\n<\/ol>\n

          A Stuck Or Failed Valve<\/b><\/h3>\n

          A stuck or failed valve, often a motorised zone valve or diverter valve, can stop your boiler controls from working as expected even when the thermostat itself is functioning correctly.\u00a0<\/span><\/p>\n

          These valves direct hot water either to your radiators or your hot water cylinder, and if one gets stuck in the wrong position, you might find your heating comes on but your hot water doesn’t, or the other way around.<\/span><\/p>\n

          A telltale sign is when adjusting the thermostat or programmer has no visible effect on one part of the system, while everything else responds normally. This points towards a mechanical issue further along the system rather than a problem with the control unit itself.<\/span><\/p>\n

          How To Fix<\/b><\/p>\n

            \n
          1. Check whether the fault affects heating, hot water, or both, and note this down before calling for help.<\/span><\/li>\n
          2. Avoid attempting to force or manually move the valve, since this can cause further damage.<\/span><\/li>\n
          3. Contact a Gas Safe registered engineer to inspect the valve and confirm whether it needs cleaning, adjusting, or replacing.<\/span><\/li>\n
          4. Ask the engineer to check the valve’s motor and wiring connections while they’re already on site.<\/span><\/li>\n
          5. Request that the whole heating and hot water cycle is tested once the repair is finished, not just the specific fault reported.<\/span><\/li>\n<\/ol>\n

            Programmer Or Timer Settings Out Of Sync<\/b><\/h3>\n

            Programmer or timer settings out of sync with the actual time or day is a surprisingly common and often overlooked cause of controls appearing to malfunction. If the clock resets after a power cut and nobody notices, the boiler can end up firing at completely the wrong times, or not firing at all if the programmed schedule doesn’t match the current day setting.<\/span><\/p>\n

            This is one of the easier issues to rule out, and it’s always worth checking before assuming a bigger fault is at play, particularly if the boiler was working fine right up until a power cut or a blown fuse elsewhere in the house.<\/span><\/p>\n

            How To Fix<\/b><\/p>\n

              \n
            1. Check the programmer’s current time and day setting against the actual time.<\/span><\/li>\n
            2. Reset the clock and day setting if either has drifted following a power interruption.<\/span><\/li>\n
            3. Review the programmed on and off times to confirm they match your usual heating schedule.<\/span><\/li>\n
            4. Switch the programmer to manual or override mode temporarily to confirm the boiler responds correctly.<\/span><\/li>\n
            5. Reprogram the automatic schedule once you’ve confirmed the manual override works as expected.<\/span><\/li>\n<\/ol>\n

              A Deeper Fault On The Boiler’s Circuit Board<\/b><\/h3>\n

              A deeper fault on the boiler’s circuit board is the least common cause but the one that requires the most caution, since it sits inside the boiler itself rather than in the external controls.\u00a0<\/span><\/p>\n

              If you’ve worked through battery, wiring, valve, and programmer checks without success, and the boiler still isn’t responding to any input, the printed circuit board, often shortened to PCB, may have developed a fault.<\/span><\/p>\n

              This can show up as an error code on the boiler’s display, a complete lack of response to any control input, or the boiler locking out and refusing to restart even after a reset. Because this involves the internal electronics of a gas appliance, it’s firmly in Gas Safe engineer territory rather than something to investigate at home.<\/span><\/p>\n

              How To Fix<\/b><\/p>\n

                \n
              1. Note any error code displayed on the boiler’s control panel before calling an engineer.<\/span><\/li>\n
              2. Try a single reset following the manufacturer’s instructions in the boiler manual, but avoid repeated resets if the fault persists.<\/span><\/li>\n
              3. Turn off the boiler safely if you notice any unusual smells, sounds, or visible damage.<\/span><\/li>\n
              4. Book a Gas Safe registered engineer to run full diagnostics on the circuit board and related components.<\/span><\/li>\n
              5. Ask whether the fault is covered under warranty or an existing service and cover plan before agreeing to any repair costs.<\/span><\/li>\n<\/ol>\n

                Why Do Boiler Controls Keep Failing Even After A Fix?<\/b><\/h2>\n

                Boiler controls keep failing even after a fix when the underlying cause hasn’t actually been resolved, only masked temporarily. A classic example is replacing batteries in a thermostat that’s actually suffering from a failing sensor, which will only buy you a short window before the same symptoms return.\u00a0<\/span><\/p>\n

                Similarly, resetting a programmer without addressing a repeated power interruption elsewhere in the house means the same clock drift is likely to happen again.<\/span><\/p>\n

                This is where getting a proper diagnosis rather than a quick patch really pays off. It’s also one of the reasons a lot of homeowners and landlords decide it’s worth having ongoing access to a Gas Safe engineer rather than dealing with each control fault as a one-off, especially once a pattern of repeat issues starts to show up.\u00a0<\/span><\/p>\n

                A<\/span> boiler cover plan from PlusHeat<\/span><\/a> means you’re not left guessing whether a fix has actually worked, since any recurring fault gets properly diagnosed and resolved by a qualified engineer rather than trial and error.<\/span><\/p>\n

                How Much Does It Cost To Repair Boiler Controls?<\/b><\/h2>\n

                The cost to repair boiler controls in the UK generally ranges from around \u00a380 for a straightforward thermostat replacement or reset, up to \u00a3300 or more if the fault involves a motorised valve, wiring repairs, or work on the boiler’s circuit board.<\/span><\/p>\n

                Call-out fees from independent engineers typically add anywhere from \u00a350 to \u00a3100 on top of parts and labour, particularly for evening or weekend visits.<\/span><\/p>\n

                Costs climb quickly once a fault is left unresolved, since a controls issue that goes untreated can put extra strain on the boiler itself, leading to a bigger repair bill down the line. This is exactly the kind of unpredictable cost that a boiler cover plan is designed to smooth out, since a single unexpected repair can easily outweigh months, sometimes years, of a modest monthly cover payment.<\/span><\/p>\n

                Can You Fix Boiler Controls Yourself?<\/b><\/h2>\n

                You can fix boiler controls yourself for some of the more straightforward issues, such as replacing batteries, resetting a programmer’s clock, or re-pairing a wireless thermostat with its receiver. These are safe, low-risk tasks that don’t involve opening up the boiler or touching any gas or mains electrical components directly.<\/span><\/p>\n

                Anything beyond that, including wiring faults, valve replacements, or circuit board issues, should always be left to a Gas Safe registered engineer. Boilers are gas appliances, and incorrect DIY repairs can create genuine safety risks, including carbon monoxide exposure, as well as potentially voiding your boiler’s warranty if unauthorised work is carried out on it.<\/span><\/p>\n

                When Should You Call An Engineer For Boiler Controls Issues?<\/b><\/h2>\n

                You should call an engineer for boiler controls issues once you’ve ruled out the simple fixes, such as batteries, wiring visibly intact, and programmer settings, and the fault still hasn’t cleared. It’s also worth calling immediately, without attempting any further troubleshooting, if you notice an error code you don’t recognise, a burning smell, unusual noises from the boiler, or a complete lockout that won’t reset.<\/span><\/p>\n

                For landlords specifically, any controls fault reported by a tenant should be treated as something to act on promptly rather than leaving until it’s convenient, given the legal duty to keep heating systems in proper working order throughout a tenancy.\u00a0<\/span><\/p>\n

                Having a cover plan in place means that call is a lot simpler to make, since the engineer visit and, in many cases, the repair itself are already accounted for rather than being an unplanned expense you have to arrange and pay for on the spot.<\/span><\/p>\n

                How To Prevent Boiler Controls Issues In The Future<\/b><\/h2>\n

                Most boiler controls issues can be avoided with a few simple habits and regular maintenance, rather than waiting for something to go wrong before taking action.<\/span><\/p>\n

                  \n
                1. Replace thermostat batteries proactively once a year rather than waiting for the display to fade.<\/span><\/li>\n
                2. Keep the area around your thermostat free from direct sunlight, radiators, or draughts that can distort temperature readings.<\/span><\/li>\n
                3. Book an <\/span>annual boiler service<\/span><\/a> so a Gas Safe engineer can check controls, valves, and wiring before small issues develop into faults.<\/span><\/li>\n
                4. Avoid unnecessary DIY adjustments to wiring or internal components, which can create problems that weren’t there before.<\/span><\/li>\n
                5. Keep your thermostat and receiver firmware updated if you’re using a smart or Wi-Fi connected system.<\/span><\/li>\n
                6. Consider a boiler cover plan so any recurring or unexpected control fault is handled quickly by a qualified engineer without an unplanned repair bill landing on you.<\/span><\/li>\n<\/ol>\n

                  Get Boiler Cover From PlusHeat Today<\/b><\/h2>\n

                  Dealing with boiler controls that won’t respond is frustrating enough without also worrying about who’s going to fix it and what it might cost. PlusHeat’s boiler cover plans, starting from \u00a34.99 a month for the first three months, include cover for your boiler and its controls alongside a free annual service, so faults like the ones covered in this guide are sorted quickly by a Gas Safe registered engineer rather than becoming an expensive surprise.<\/span><\/p>\n

                  With 24\/7 support and priority repairs built into every plan, you’re never left waiting around wondering when help will arrive, whether it’s a stuck valve, a wiring fault, or something deeper in the system. Plans scale up to include central heating, plumbing, electrics, and more, so you can choose the level of cover that suits your home.<\/span><\/p>\n

                  Explore PlusHeat’s boiler cover plans<\/span><\/a> and get your heating controls properly protected before the next fault catches you out.<\/span><\/p>\n

                  Frequently Asked Questions<\/b><\/h2>\n

                  Do smart thermostats fail more often than standard wired thermostats?<\/b><\/h3>\n

                  Smart thermostats don’t inherently fail more often than standard wired thermostats, but they introduce additional points of failure, such as Wi-Fi connectivity and app syncing, that wired systems simply don’t have. Most reported issues with smart thermostats relate to connectivity rather than the physical hardware itself.<\/span><\/p>\n

                  Can extreme cold weather cause boiler controls to stop working?<\/b><\/h3>\n

                  Yes, extreme cold weather can affect boiler controls, particularly if a wireless thermostat or receiver is located somewhere draughty or unheated, since very low temperatures can affect battery performance and sensor accuracy. Frost can also affect external components like condensate pipes, which may trigger a lockout that looks like a controls fault but is actually linked to freezing.<\/span><\/p>\n

                  Does a power cut reset all boiler control settings?<\/b><\/h3>\n

                  A power cut can reset certain boiler control settings, particularly the clock and programmed schedule on a wired programmer, though most modern thermostats retain their basic configuration through a backup battery or memory chip. It’s always worth checking the time and schedule settings after any power interruption, even a brief one.<\/span><\/p>\n

                  Are boiler control faults more common in older properties?<\/b><\/h3>\n

                  Boiler control faults can be more common in older properties, mainly because the wiring, thermostats, and programmers installed years ago are more likely to have degraded over time compared to newer systems. Older properties may also have controls that are no longer fully compatible with newer boiler models if the heating system has been partially upgraded.<\/span><\/p>\n

                  Does insurance cover boiler control repairs if the fault is due to a power surge?<\/b><\/h3>\n

                  Standard home insurance typically doesn’t cover boiler control repairs caused by everyday wear and tear, but some policies do cover sudden and accidental damage from events like a power surge, depending on the specific terms. It’s worth checking your home insurance documentation separately from any dedicated boiler cover plan, since the two are designed to cover different types of faults.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

                  If your boiler controls not working has left you fiddling with the thermostat for no result, the causes are usually more ordinary than people expect.\u00a0 Most of the time it comes down to flat batteries in a wireless thermostat, a lost connection between the thermostat and the boiler’s receiver, a programmer or timer that’s been […]<\/p>\n","protected":false},"author":2308,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[133],"tags":[],"class_list":["post-90304","post","type-post","status-publish","format-standard","hentry","category-boiler-advice"],"acf":[],"yoast_head":"\nBoiler Controls Not Working: Causes & Solutions<\/title>\n<meta name=\"description\" content=\"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.\" \/>\n<meta name=\"robots\" content=\"noindex, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Boiler Controls Not Working: Causes & Solutions\" \/>\n<meta property=\"og:description\" content=\"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\" \/>\n<meta property=\"og:site_name\" content=\"PlusHeat UK\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/plusheatuk\/\" \/>\n<meta property=\"article:published_time\" content=\"2026-08-09T18:00:23+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.plusheat.co.uk\/__prelive\/wp-content\/uploads\/2025\/12\/banner-image.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"675\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"div@essheo.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@PlusHeatUK\" \/>\n<meta name=\"twitter:site\" content=\"@PlusHeatUK\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"div@essheo.com\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"14 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":[\"Article\",\"BlogPosting\"],\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\"},\"author\":{\"name\":\"div@essheo.com\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/person\/02a2addc57d76ddd5eaa751159b230c5\"},\"headline\":\"Boiler Controls Not Working: Causes & Solutions\",\"datePublished\":\"2026-08-09T18:00:23+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\"},\"wordCount\":2888,\"publisher\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#organization\"},\"articleSection\":[\"Boiler Advice\"],\"inLanguage\":\"en-GB\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\",\"url\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\",\"name\":\"Boiler Controls Not Working: Causes & Solutions\",\"isPartOf\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#website\"},\"datePublished\":\"2026-08-09T18:00:23+00:00\",\"description\":\"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.plusheat.co.uk\/__prelive\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Boiler Controls Not Working: Causes & Solutions\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#website\",\"url\":\"https:\/\/www.plusheat.co.uk\/__prelive\/\",\"name\":\"PlusHeat\",\"description\":\"From home emergency cover to one-off repairs, PlusHeat is here with 24\/7 support to help you take better care of your home. Whether it\u2019s your boiler, heating, plumbing, drainage, or electrics, our expert engineers are ready to get the job done.\",\"publisher\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#organization\"},\"alternateName\":\"PlusHeat\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.plusheat.co.uk\/__prelive\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#organization\",\"name\":\"PlusHeat\",\"url\":\"https:\/\/www.plusheat.co.uk\/__prelive\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.plusheat.co.uk\/wp-content\/uploads\/2019\/09\/Site-Logo.png\",\"contentUrl\":\"https:\/\/www.plusheat.co.uk\/wp-content\/uploads\/2019\/09\/Site-Logo.png\",\"width\":141,\"height\":27,\"caption\":\"PlusHeat\"},\"image\":{\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/plusheatuk\/\",\"https:\/\/x.com\/PlusHeatUK\",\"https:\/\/www.pinterest.co.uk\/plusheatboilercover\/\",\"https:\/\/www.youtube.com\/channel\/UCqQXX7EGkuxGmsW0HiVhLvA\/featured?view_as=subscriber\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/person\/02a2addc57d76ddd5eaa751159b230c5\",\"name\":\"div@essheo.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g\",\"caption\":\"div@essheo.com\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Boiler Controls Not Working: Causes & Solutions","description":"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.","robots":{"index":"noindex","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"og_locale":"en_GB","og_type":"article","og_title":"Boiler Controls Not Working: Causes & Solutions","og_description":"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.","og_url":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/","og_site_name":"PlusHeat UK","article_publisher":"https:\/\/www.facebook.com\/plusheatuk\/","article_published_time":"2026-08-09T18:00:23+00:00","og_image":[{"width":1200,"height":675,"url":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-content\/uploads\/2025\/12\/banner-image.jpg","type":"image\/jpeg"}],"author":"div@essheo.com","twitter_card":"summary_large_image","twitter_creator":"@PlusHeatUK","twitter_site":"@PlusHeatUK","twitter_misc":{"Written by":"div@essheo.com","Est. reading time":"14 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Article","BlogPosting"],"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#article","isPartOf":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/"},"author":{"name":"div@essheo.com","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/person\/02a2addc57d76ddd5eaa751159b230c5"},"headline":"Boiler Controls Not Working: Causes & Solutions","datePublished":"2026-08-09T18:00:23+00:00","mainEntityOfPage":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/"},"wordCount":2888,"publisher":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#organization"},"articleSection":["Boiler Advice"],"inLanguage":"en-GB"},{"@type":"WebPage","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/","url":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/","name":"Boiler Controls Not Working: Causes & Solutions","isPartOf":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#website"},"datePublished":"2026-08-09T18:00:23+00:00","description":"Boiler controls not working is usually caused by flat batteries, wiring faults, lost wireless signal, or a stuck valve.","breadcrumb":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/boiler-advice\/boiler-controls-not-working\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.plusheat.co.uk\/__prelive\/"},{"@type":"ListItem","position":2,"name":"Boiler Controls Not Working: Causes & Solutions"}]},{"@type":"WebSite","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#website","url":"https:\/\/www.plusheat.co.uk\/__prelive\/","name":"PlusHeat","description":"From home emergency cover to one-off repairs, PlusHeat is here with 24\/7 support to help you take better care of your home. Whether it\u2019s your boiler, heating, plumbing, drainage, or electrics, our expert engineers are ready to get the job done.","publisher":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#organization"},"alternateName":"PlusHeat","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.plusheat.co.uk\/__prelive\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#organization","name":"PlusHeat","url":"https:\/\/www.plusheat.co.uk\/__prelive\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/logo\/image\/","url":"https:\/\/www.plusheat.co.uk\/wp-content\/uploads\/2019\/09\/Site-Logo.png","contentUrl":"https:\/\/www.plusheat.co.uk\/wp-content\/uploads\/2019\/09\/Site-Logo.png","width":141,"height":27,"caption":"PlusHeat"},"image":{"@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/plusheatuk\/","https:\/\/x.com\/PlusHeatUK","https:\/\/www.pinterest.co.uk\/plusheatboilercover\/","https:\/\/www.youtube.com\/channel\/UCqQXX7EGkuxGmsW0HiVhLvA\/featured?view_as=subscriber"]},{"@type":"Person","@id":"https:\/\/www.plusheat.co.uk\/__prelive\/#\/schema\/person\/02a2addc57d76ddd5eaa751159b230c5","name":"div@essheo.com","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/0f5fc8190032ee09f8f4c4fc98401fae14584b2f0afc2c369a31aa59f151f9a2?s=96&d=mm&r=g","caption":"div@essheo.com"}}]}},"_links":{"self":[{"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/posts\/90304","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/users\/2308"}],"replies":[{"embeddable":true,"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/comments?post=90304"}],"version-history":[{"count":0,"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/posts\/90304\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/media?parent=90304"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/categories?post=90304"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.plusheat.co.uk\/__prelive\/wp-json\/wp\/v2\/tags?post=90304"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}