Contact us

support@plusheat.co.uk
0808 164 2892
Mon-Fri 09:00 – 17:00
Emergency Breakdown
0808 164 2893

Book Service Book Repair

Boiler service in London from £6.98/mo

Arrange a yearly service for your boiler today.
The capital's hard water leaves scale inside boilers, and many new flats have flues hidden above the ceiling. Our Gas Safe engineers examine such issues and ensure that your central heating system runs efficiently.

Gas Safe engineer showing a customer her serviced boiler

What’s Included in Our Gas Boiler Service in London

PlusHeat boiler service includes the following seven checks:
Since London's water is hard, the engineer also checks for scale forming inside the boiler and tells you if it's building up.

7-point boiler check

Every visit
  1. Visual checkInspection of the boiler and its connections for leaks, damage, or wear.
  2. Operation and safety testThe boiler is run to check the operation of its safety devices, gas flow, and pressure.
  3. Flue and ventilation checkTo see that the flue carries fumes safely outside and that the boiler has sufficient ventilation.
  4. Internal inspectionIn case of necessity, the casing is removed to inspect the inner components.
  5. CleaningThe condensate trap is cleared, and other parts are also cleaned, if required.
  6. Pressure checkThe system pressure is checked and brought back into range if it has drifted.
  7. Radiator checkExamined by bleeding radiators, where needed.

Swipe to compare plans →

Not sure which plan fits? Compare what each one covers below or call 0808 164 2892.

Just need a service?

Boiler service

£6.98/mo

Boiler service only

Get my plan

Best value

Want repairs covered too?

Boiler cover

From £4.99/mo

Boiler cover + free annual service

£4.99/mo for the first 3 months, then £9.98/mo.

See boiler cover

Why London's Water and Housing Impacts Your Boiler

Thames Water, the main supplier in London, states that all the water across its supply area is hard. It takes 65% of its water from rivers and 35% from underground sources, and the water picks up minerals as it passes through chalk and limestone. When a boiler heats this water, the minerals form limescale inside it, lowering the efficiency over time.

Flats in London need extra attention. As per the 2021 Census, 54.0% of London households lived in a flat, maisonette or apartment (ONS). Where a flue is hidden in a ceiling or wall void, almost all of those homes are new build flats and apartments finished since 2000 (HSE). In those flats the boiler often sits on an internal wall, with the flue running out of sight. Engineers must be able to check the full length of the flue, which usually means fitting inspection hatches. If the flue can’t be inspected, the engineer has to class the boiler as “At Risk” and, with your permission, turn it off.

Older houses bring a different set of problems. Victorian and Edwardian homes are common across London, and many have been converted into flats. When the heating system is old, sludge, poor circulation, and pressure drops become more likely.

Why Londoners Choose PlusHeat for Their Boiler Service

Since 2016, over 45,000 households across the UK have chosen PlusHeat, and thousands of them have rated us five stars on Trustpilot.

Our Gas Safe engineers cover Greater London, including Barnet, Ealing, Croydon and Greenwich. Our work is built on the following values:

  • Reliable: An annual reminder tells you when your next service is due.
  • Trustworthy: Engineers clearly explain problems in easy language and leave the decision of extra work to you.
  • Convenient: Appointments are arranged around your week, to conveniently fit your busy schedule.
  • Supportive and responsive: If you have a question about your plan, our team is a phone call away on 0808 164 2892.

Common Problems Found in London Boilers

These four problems show up frequently on our London visits:

  • Limescale in the heat exchanger: Hard water coats the hottest parts of the boiler with scale, which reduces efficiency and causes a rumbling noise, called kettling.
  • Flues that can’t be inspected: A flue hidden in a ceiling void without hatches can’t be checked, so the boiler may have to be classed as ‘At Risk’.
  • Loss of pressure: Tiny leaks or ageing seals in an older system make the pressure drop, so the heating runs poorly.
  • Sludge and poor circulation: Dirt and rust in older pipework slow the flow of water, and radiators stay cold at the bottom.

Most of these come from London’s hard water, the way flues were fitted in newer flats, or an ageing heating system. Our engineer can also suggest ways to protect your boiler from scale.

Get Your London Boiler Serviced Today

At £6.98 a month, our plan turns the service into small monthly payments in place of one large bill. This includes priority appointments as well as yearly reminders.

Booking online takes under 60 seconds. You can also call our team on 0808 164 2892.

Landlords must arrange a gas safety check on every gas appliance and flue they provide once every 12 months, and only a Gas Safe registered engineer can carry it out (HSE). This covers a big share of the city, since London had the highest rate of private renting of any English region at the 2021 Census, at 30.0% of households (ONS). Our landlord plans include a Gas Safety Certificate (CP12) as well as the yearly service. For monthly payers, a CP12 needed in the first three months carries a one-off £79 fee.

Outside the capital, we also cover St Albans, Chelmsford and Brighton. See how each plan works on our annual boiler service page.

What our customers say

We’re proud of the feedback we receive, and even prouder of the service behind it.

Frequently asked questions

How much does a boiler service cost in London?

With PlusHeat, the annual service plan is £6.98 a month. Checkatrade’s 2026 cost guide gives a UK average of about £100 for a one-off gas boiler service, and it notes that prices change with location, so local quotes can vary.

Does London's hard water affect boilers?

Yes. Heating hard water leaves limescale on the boiler’s heat exchanger, and with time, this scale reduces efficiency and can make the boiler noisy. Thames Water suggests setting hot water to 60°C to limit scale. Our engineer checks for build-up at every service.

How often should I book an annual boiler service in London?

A gas boiler should be serviced once every year. In a hard-water city, the yearly visit catches scale early, and most manufacturers expect regular servicing for their warranty to stay valid.

Do you service boilers in London flats and apartments?

Yes, we service boilers in flats, maisonettes and houses across London. If the flue in your flat runs through a ceiling or wall void, the engineer needs to see it along its full length, which usually means inspection hatches (HSE). You can check for hatches before the visit, because a flue that can’t be inspected leaves the boiler classed as ‘At Risk’.

Which boiler brands do your engineers service in London?

Our engineers service most major brands, including Worcester Bosch, Vaillant, Baxi, Ideal, Glow-worm, Viessmann and Alpha. They work on combi, system and regular boilers from each of these makers.

Do you cover areas outside central London?

Yes. We also cover central boroughs such as Camden, Islington and Westminster, and outer London, including Barnet, Enfield, Harrow, Hillingdon, Ealing, Hounslow, Richmond, Kingston, Sutton, Croydon, Bromley, Bexley, Greenwich, Havering and Redbridge.

See all FAQs

The PlusHeat Promise

Everything we do is based around the five core elements of our Promise. Whether you are a homeowner, landlord or an estate agent, stay confident in the knowledge that your boiler will get the very best service.

Reliable

Trustworthy

Convenient

Supportive

Responsive